GIGABIT EPON Terminal – S-EP200
- Description : GIGABIT EPON Terminal
- Model No : S-EP200
- Support port-based rate limitation and bandwidth control
- In compliant with IEEE802.3ah Standard
- Up to 20KM transmission Distance
- Support data encryption, group broadcasting,port Vlan separation, etc.
- Support Dynamic Bandwidth Allocation (DBA)
- Support ONU auto-discovery/Link detection/remote upgrade of software
- Support VLAN division and user separation to avoid broadcast storm
- Support power-off alarm function, easy for link problem detection
- Support broadcasting storm resistance function
- Support ACL and SNMP to configure data packet filter flexibly
- Specialized design for system breakdown prevention to maintain stable system
- Support software online upgrading EMS network management based on SNMP, convenient for maintenance
Enquiry Download Datasheet
- Technical Specifications
- PON Interface: 1 EPON optical interface, Meet 1000BASE-PX20+ standard Symmetric1.25Gbpsupstream/downstream, SC single- mode fiber Split ratio:1:64,Transmission distance 20KM.
- User Ethernet Interface: 1*10/100M auto-negotiation, 1*10/100/1000M auto-negotiation Full/half duplex mode, RJ45 connector, Auto MDI/MDI-X, 100m distance
- Power Interface: 12V DC Power supply
- PON Optical Parameter: Wavelength: Tx 1310nm, Rx1490nm, Tx Optical Power: -1~ 4dBm Rx Sensitivity: -25dBm, Saturation Optical Power: -3dBm Connector Type: SC, Optical Fiber: 9/125?m single-mode fiber
- Data Transmission: Data Transmission Parameter, PON Throughput: Downstream 950Mbps; Upstream 930Mbps Ethernet: 100Mbps, 1000Mbps, Packet Loss Ratio:<1*10E-12 latency: <1.5ms
- Business Capability: Layer 2 wire speed switching, Support VLAN TAG/UNTAG, VLAN conversion, Support Port-based speed limitation Support Priority classification, Support storm control of broadcast.
- Management Mode: Support IEEE802.3 QAM, ONU can be remotely managed by OLT Support Remote management through SNMP and Telnet Local management.
- Management Function: Status monitor, Configuration management, Alarm management, Log management.
- LED Indicator: PWR: Power up or down, SYS: System instructions
- OPTIN: Optical Link Status, LINK: ONU Registered
- LAN: Link Status of Ethernet Interface
- Shell: Plastic casing
- Power: External 12V 0.5A AC/DC power supply adapter
- Power consumption: <2W(),<2.3W(PL311HC)
- Environmental Specifications:
- Operating temperature: -10 to 60 ºC
- Storage temperature: -40 to 70 ºC
- Operating humidity: 10% to 90% (Non-condensing)
- Storage humidity: 10% to 90% (Non-condensing)